Vintage Delta Tools, Photos & Resources

Combination Delta Homecraft 34-160 8" Table Saw & Delta Milwaukee 37-290 4" Jointer 
I inherited this wonderful vintage combination Table Saw & Jointer from my father. I've used both tools with great success for building and repairing furniture. …

Delta Crescent 8" Jointer w/ Cast Iron Base 
Purchased 11/2010 from a local school district. This machine had been in storage for several years. Machine was completely disassembled, cleaned, sanded …

Delta Rockwell Radial Arm Saw 
Planning on restoring this RAS but I'm not sure which model it is and was hoping someone could help me identify it with a model No. Here's what I do know; …

Delta Milwaukee Wood turning Lathe 
I just purchased an old Delta Wood Lathe and it has a model #CBL 401 and the serial #29-3596. I cannot find any reference on the net for parts or an owners …

Delta 10" Table Saw, RH tilt 
The picture above is from the post by Todd Holland on this web site. Our saw looks just like this one. The saw is pretty old but does not show any …

Delta Rockwell Planer model PM-1738 
I just inherited this planer from my late uncle, and was just looking for some information on it. I have the manual for it, but it doesn't say what year …

1988 DELTA RU50 OVERARM ROUTER 
This machine was recently purchased by me from Purdue University. I'm looking for manuals, tools, pin guides for the table. The motor is a 3 HP 3 phase. …

Rockwell 43-110 shaper/router 
Someone gave me this old Rockwell. How can I tell what year it was made? Serial #DO8681. Everything turns, but the motor will not spin under its own power. …

Milwaukee delta lathe serial # 646477 
Milwaukee delta lathe serial # 646477 Runs great! I do not use it and would like to sell it. Can someone tell me what it is worth? I also have a number …

Rockwell Delta Milwaukee 6 inch Jointer 
This is a heavy cast iron machine with a 32 inch bed. On one side it has a red nameplate that says it was manufactured by Rockwell serial no. 90-1129. …

Delta Rockwell 46-111 Gap-Bed Wood Lathe  
1965 Delta Rockwell No. 46-111 Wood Lathe Includes Delta cast iron legs and Rockwell 1/2 HP motor. Came with face plates and Delta accessories including …

Delta Milwaukee Drill press by Rockwell MFG 
I found this in an old barn last month. Did not do much cleaning to it. Oiled up the chuck and all detectable moving parts I could oil. I probably used …

Delta TCS-203 
I have a Delta TCS-203 (10 in saw and 6 in jointer). I would like to sell it but have no idea what would be a fair price for it on ebay. Any help?

Delta Rockwell Homecraft 11" Drill Press 
I am in the middle of restoring this drill press to an acceptable viewing condition. This was purchased by my father at a tool auction and given to me …

Delta Drill Press 1934 
Delta 1934 model/with foot assembly. Serial No. 4-7073 - Table and stand parts no.-DP 204/ foot assembly part no.DP220 395/ delta double duty motor …

Homecraft 8" Tilt Table Saw with 4" Jointer  
The tools are mounted on one table with the locking castors. The unit appears to be complete with the exception of motor and the four pulleys. Each unit …

Delta Milwaukee Homecraft 8" tilting table, Table Saw SN-49-7269 
If anyone has information on this saw and or parts that might be available, would you please contact me @ willep@earthink.net. This saw was left at …

Delta jointer serial number 2-1102 Not rated yet
Hello: This is my Delta jointer that I've had for several years now. It was my grandfather's and I believe that it is from the late 1930's or early 40's. …

Drill Press Not rated yet
this Delta drill press belongs to my dad, and is from the early 70's. We need to sell it but not sure of the value. It works 100%. Any help you can provide …

Delta The Grey Line Tools Not rated yet
Hello, I had handed down to me these shop tools that my grandfather used to make furniture and other wood items. I want to get them up and working at …

Looks like a table saw Not rated yet
Looks like an old table saw. Pictures attached.

Delta 'scroll' saw? Not exactly sure Not rated yet
So this vintage giant has been sitting in a corner for decades under appreciated. I'd like to get this machine into the right hands were it can be restored …

Delta dss2 scroll saw Not rated yet
Picked it up answering an ad for a scroll saw. It was and is mounted on a nice cabinet all painted gray. The older man was in a wheel chair and couldn'y …

Delta 10 1/4" Speedmatic 10" Circular Saw  Not rated yet
Its Heavy ! serial number 15114

Click here to write your own.

Delta Crescent Band saw what year and value? Not rated yet
I have a nice old working band saw. Can somebody help me identify the age, serial number and approximate value of the Delta Crescent band saw? The depth …

Delta Drill Press Model No. 13-5498 Not rated yet
Delta Drill Press Model No. 13-5498. Drill press with 3/4 hp motor. Looks to be about a 1930 vintage machine. It's running and in good condition.

Delta/Crescent 8" Jointer Not rated yet
Purchased 11/2010 from a local school district. This machine had been in storage for several years. Machine was completely disassembled, cleaned, sanded …

Delta Model 39 Scroll Saw - Need Manual Not rated yet
Look for owner/operator parts manual for Delta Model 39 scroll/jig saw. Any help would be appreciated?

Great Looking but Unknown Bandsaw Not rated yet
Does anyone know what make/model this is? This band saw was given to me after my great uncle past away. At one time he had started to restore it. He took …

Rockwell 37-220 6 inch Jointer - Need Parts Not rated yet
I have a 37-220 6" joiner. I need a part # 45 Screw for in feed table. Any one out there with suggestions. All parts places don't make the adjusting height …

Delta Model 930 Lathe - Need legs Not rated yet
Trying to restore the Delta 930 lathe received from my brother in-law. Any suggestions as to Where I can find the model 947 legs to complete the job?

1460 12 inch Delta/Rockwell wood lathe (old style) Not rated yet
Hi, Just purchased used Delta/Rockwell 1460 wood lathe, old style. Pretty much complete except for tool rest and the motor. I would be very lucky …

DELTA BENCH SABRE SAW Not rated yet
I HAVE A DELTA SAW BECH MODEL AND THE TABLE IS A 10" X 10". THERE IS NO OVERARM MECHANIZIM. THE BLADE THAT IS IN THE SAW IS A SABRE SAW BLADE AND THE BLADE …

Delta 10" Unisaw 1949 Not rated yet
Motor won't run. Could you suggest a source for a new or used motor, or a place that would repair it at a reasonable price? As you know, the motor is …

TCS - 203 tablesaw Not rated yet
I am trying to find a parts list for this table saw. The drive pulley on that turns the blade is warped and i am trying to find another one... Brandon …

Delta shaper model 43-110 Not rated yet
I am trying to find one of the original jigs that was available when my shaper was manufactured. The jig is model no. 1186. None of the newer jigs seem …

Delta 1200 Series Scroll Saw Not rated yet
I obtained this saw from a neighbor, it was setting out in the weather last year at this time. Since I have cleaned it up and used it a couple of times. …

1955 UNISAW s#114 1468 Not rated yet
The motor went out and I took it to a company here in Savannah Ga to see if they could repair it. Never heard back and when I went to the shop to ask …

Unknown Not rated yet
I bought this years ago with the intention of making a finished scroll saw but never got "a round to it". Now I have someone interested but need to know …

What is this Tool? Not rated yet
I bought this years ago with the intention of making a finished scroll saw but never got "a round to it". Now I have someone interested but need to know …

Delta Milwaukee Scroll Saw? Not rated yet
This saw was left in our garage from the previous owners when we moved into our new house. I would love to get rid of it and make some money at the same …

Rockwell Delta Milwaukee 6 inch jointer Not rated yet
I had used a 4 inch Delta Homecraft jointer for several years and had been very satisfied with it. An employee transferred into the office where I worked. …

Vintage Delta 12" Planner Not rated yet
I got this from my grandfather when he died. I laid it down in my truck and when I got home there was oil in the bed of my truck. Where do I replace it …

Delta Table Saw, Serial No. E 4820 (late 1940s-early 1950s) Not rated yet
I have an old, but very functional Homecraft (by Delta a division of Rockwell Mfg.) 8" table saw. It needs a good home (and a new base and motor). I …

delta homecraft lapidary table  Not rated yet
i dont know much about this i was hoping someone might be able to tell me how old the arbors are my email is timholum@hotmail.com

Delta Rockwell Spindle Shaper Model 43-205 Not rated yet
This is a 1955 unit that was in a cabinet shop I used to work in. It saw irregular use mainly because it was set up to run one particular locking joint …

Rockwell serial# 85-525 Not rated yet
Rockwell 3/4 inch shaper, belt driven, runs great but does anyone have information about this shaper I have more pics my email jacobsonroger@yahoo.com …

Delta Unisaw Not rated yet
I have an old Delta Unisaw from 1939 that I purchased several years ago and need to get it back together. I did a complete teardown. I am looking for a …

Table Saw and Jointer Not rated yet
Built in early 40,s.I need a part for it. The part makes the table go up and down. The threads are wore out. The part #TC5-234 i think.

Click here to write your own.

First series Unisaw Not rated yet
Can anyone provide information of the possibility of swapping the inner workings (trunnion and all related shafts) from a second series unisaw into a very …

Delta 12" Band Saw Not rated yet
I just picked up an old delta 12" band saw but don't see any model numbers anywhere on the unit. It appears to take a 78" blade. It has about 10 or …

Delta Tilt Table Saw Not rated yet
I bought it at a public auction a while back and the part that holds up and pivets the top has been shattered. i'm trying to find a replacement part but …

Delta-Milwaukee table saw& Planer, Serial #100-812 , 101-2630 Not rated yet
Received from a friend whose grandfather was a general contractor and am restoring it with two moulding heads and 12 sets of cutters and 2 stacked dado …

Porter Cable Not rated yet
I need a model 167 porter cable blade or equivelent blade. the one I have worn out. thanks, charles brown. email--canyonchuck@webtv.net

rockwell 860 (maybe) Not rated yet
I have a green rockwell 1930's table saw all cast iron I need a part or two , the closest one to resemble it is an 860 but mine has no star wheels it has …