Share Your Vintage Craftsman Tool Photos

Craftsman Table Saw Model 109.22620 
Have this old power table saw made by Sears & Roebuck that's a model 109.22620. Found a copy of a manual online that dates it to 1946. Would like to ...

Craftsman Wood Shaper Model 113.239420 
This woodshaper is Craftsman Contractor Series, model 113.239420. It is brand new --never been used, just assembled. I can't find it listed anywhere. I ...

Vintage Craftsman 13" Drill Press 
This is a 13in. bench top drill press. It has a tilting table, 1/2 in chuck. I can't find a model # anywhere. Has been in the family for 35yrs and it was ...

8" Craftsman Circular saw Model 207.25602 
This came to me through a friend. Old and nice. I also have the original holding box and the little grease gun. The cord has seen better days but the saw ...

1969 Craftsman Radial Arm Saw 
I have an old Craftsman 10 inch radial arm saw from 1969. The problem I am having is that after the initial start and stop, it does not start the blade ...

23" scroll saw model 149236160 
I'm having trouble installing blades. It always has given me trouble but this time I can't seem to get the lower blade to hold.

any ideas?

King-seeley/craftsman wood lathe model #103.23070 
I just bought this lathe off of craigslist this past week. it is in really good overall shape. bearings are good and a smooth running lathe. The only problem ...

Craftsman model 100 part number 113.29991 is this just an older model ? 
It is a solid machine on the sears stand, the body is gold, most I have seen are gray. It is a 10" tilting, left leaning, one extension on the left two ...

12" Bandsaw Motor 
I have a Craftsman 12: Bandsaw, Model 113.247310 that is in need of a motor. Motor heats up and smokes after about 30 seconds. Any ideas about where to ...

Sears/Craftsman Contractor Series 10" Belt Drive 3hp Table Saw 
The name plate is not legible, it has a 3hp electric motor which is burned out. I also need a fence and miter gauge for it. It is in pretty rough shape ...

Craftsman Scroll Saw model 103.23390  
Just acquired this saw which is in excellent shape. Not sure what size (length) blades to use nor how to connect them. Top chuck does have two set screws ...

Miter box model 881.36303 and kromedge 26" satin cut miter saw 
Belonged to my husband's father. We have used it to cut crown moulding in our den so it does work ok. Tried to give it to someone who was making renovations ...

Craftsman Table Saw 103-22160 
I need part #37418. Not sure of the name of the part but it has a rod that sticks out to aline the motor position. Also the electrical cord has dry rotted....

Craftsman Belt Sander /Model #207.2230 
This tool was made by The American Floor Surfacing Machine Company. The instruction manual inside an envelope post marked Aug 13th,1951. The catalog discribes ...

Craftsman 36" Wood Lathe 
I purchased this old lathe about 3 years ago and am just getting around to cleaning it up. I find that it does not have a Make, model No. or S.No. on ...

Oak Machinist Chest Craftsman 
This is an old craftsman tool box, 8 drawers, green felt on metal bottoms. I have no idea how old and am trying to establish value.

Shaper Table, Model 103.23920 circa 1952-1954 
This Machine was Manufactured for Craftsman by the "King-Seeley Electrics Co." I Use Mine a Lot, sure beats the New Ones. I have the Bits to Make Old Style ...

Compound (Sliding) Miter Saw 315.23740 
I would like to know how to change the blade. I would also like to find an owners manual.

I have not been able to figure out how to lock the spindle ...

103.23920 Craftsman Shaper Table/King-Seeley Mfg. 
Inherited from My Father's Wood Shop, he purchased it back in the early 60's. Works Great, in "My Book" it's a Keeper! Out-performs my Freud Plunge Router/...

1963 Sears Industrial rated power hand saw. Almost New still with box and manuals. 
I bought this electric handsaw at an auction for $22.00. The saw was still the box(worn). In the box was the parts list, wrench, rip guide, "How to use ...

Craftsman Scroll Saw and Craftsman Band Saw 
I have just acquired a vintage Craftsman scroll saw and vintage Craftsman Band Saw both in working order, I do not know how old they are but I would like ...

Craftsman 18" Band Saw 
I bought this sight unseen from a school auction. Being a former shop teacher I know how used, abused and thrashed some machines get before going to auction....

Antique Craftsman Heavy Cast Iron Jigsaw 
I was wondering what, if anything, this might be worth? My grandfather got it in the late 40's/early 50's and it still works. It's extremely heavy. Naturally,...

Craftsman Shaper Model 101.23810 
I bought this shaper about 15 years ago from an aquaintance who no longer had room in his shop. I have about 12 bits of various styles. They are all 1/...

Unknown Craftsman Tool - Band Saw ? 
My son sent me this picture of a Craftsman tool thinking I might know what it is but it has me stumped. He was told by the owner of the warehouse he could ...

Craftsman Band Saw King Seely Model #103.24280 
It is old made after WW II somewhere between 1945-50

1974 Craftsman Radial Arm Saw w/ light 
I am trying to sell this saw, but i can't seem to find a collector or what it is worth. anyone have suggestions? Thanx, AZ

Vintage Craftsman Bench Top Drill Press 
I picked this drill press up at a yard sale. It has a four speed pulley and a tilting table. The serial number is 103.0305. I don't know how old it is....

Craftsman Bench saw 10" tilting arbor 
Can you tell me approximately when this was manufactured Craftsman Model # 113.29901.
I have operating instructions but no date on this manual put out ...

Craftsman 4 inch planer model no. 103.20670 
Craftsman 40 planer. still works. motor runs (craftsman general use motor). homemade on/off switch. Planer is model no. 103.20670. was wondering if anyone ...

circular saws 
I have 2 old circular saw that i believe to be from th 50's or 60's. I have not been able to find out much about them. I have not seen any that have the ...

Model 103.23151 Scroll Saw 
Just got this scroll saw lathe combo for only $45, came with an awesome homemade table. The blade is broken so I'm hoping to get a new one soon, but the ...

Craftsman Band Saw  
Someone is giving this away on craigslist.Oahu Hawaii.(09/07/08

FREEE!!!Vintage Craftsman Band saw. I am thinking 1950s. Needs cleaning up etc but ...

Model 103.21041 8" Table Saw 
Manufactured by King-Seeley about 1960. This saw belonged to my dad, who passed away in 1991. I added the right-hand extension from a later model saw.

Model 101.06242 Dunlap(Atlas) Lathe 
I bought this lathe from a friend who had it stored in his garage. He had inheirited it from someone years ago, and had no use for it. I took it apart,...

Model 103.1801 Planer 
I recently bought this old planer from a friend who had it stored in his garage. He had no use for it and asked me whether I was interested in it.
I completely ...

Craftsman 3/4 hp 8 inch Table Saw  
ok/ my table saw was bought by my grandfather, don't know what year but I obtained through my family of woodworkers. the saw has run great all this ...

Jointer Model # 103.23340, Table Saw Model # 103.22880, electric motor Model# 1156963 
These tools were found in an old barn and both work off the motor via a belt drive. I'd love to get some information on these tools, Manuals manufacture ...

Craftsman Table Saw Model # 103.02041 
I have an old craftsman table saw Model #103.02041. The motor that is with it is a Century single phase motor, serial # HH2, 60 cycle - 1750 rpm, dated ...

Vintage Craftsman 24" Scroll Saw 
I found this scroll saw on Craigslist. It's a Craftsman heavy duty scroll saw. The throat capacity measures about 23 1/2 inches. It has a GE 1/4 hp motor ...

10" craftsman tilting arbor bench saw (model #113.27520) and 4 3/8" Jointer (model #103.23340) with original manuals 
I was given these 1952 era tools by my grandfather. Both are in good, fully working condition, but I no longer have the motors, just the tools themselves....

Very Old Craftsman Table Saw 
I just acquired this oldie from a friend, and would like to know the year it was made, and what it may be worth. The model number is 109.22620
It is powered ...

6" Jointer 
I inherted these tools and would like to know there value
I am moving soon and can not take with me
All three shop tools I have are for sale

1. 6"...

Craftsman table saw model 103.20002 
I just bought this table saw. I know it looks a bit rough, but it works really well. I wanted an older saw instead of a newer one. The older saws just ...

Craftsman Table Saw 113.27520 
I have a craftsman 113 with both cast iron wings and the mcro adjustable rip fence. Runs great after 50 years!

Dan

Craftsman 12" Band Saw 1950's 
Craftsman 12" Band Saw 1950's

1961 ? Model #113.29991 Craftsman Sears & Roebuck Table Saw 
10 inch, very well kept like new, all original Craftsman Sears And Roebuck Table Saw (Bench Saw). What is it worth? kfdmo@hotmail.com

Craftsman (King Seeley) Model No. 103.22160 8" Table Saw 
Known as the Craftsman "80" 8-inch Tilting-Arbor Bench Saw, this Craftsman Model 103.22160 8" Tilting Arbor Table Saw was made by the King Seeley Corp....

Craftsman 18" Jig Saw Model No. 103.23150 
Nice old Craftsman 18" Jig Saw Model No. 113.23150. This saw is made of heavy cast iron and has a removable arm so that you can use it as a stationary ...

1950's Craftsman 2 Wheel Band Saw Model No. 113.24261 
This is a Craftsman 12" Band Saw Model No. 113.2461 on a single pedestal stand. I believe that it's from the late fifties or early 1960's. It's listed ...

Antique Craftsman Table Saw - 1940?  Not rated yet
Cannot find anything about it. Would appreciate any information that you can provide.

Craftsman Model 113.243310 Vertical band saw New 1987  Not rated yet
I have this 12" Craftsman B/S w/6" Under Blade Guide. It is in excellant condition. I use it several times a week in my ( small )Wood Shop. If anyone ...

12 inch Sears Planner model no. 306.9141  Not rated yet
This planner was purchased in 1952 or 1953 . It is in very good condition and has been used very little. This is the first time repair parts have ever ...

Vintage Craftsman 6" Jointer Planer   Not rated yet
I have an old planer which I was given by my father in law. I have spacial issues now and am considering selling it. Works great but can't make out model ...

Industrial Rated Craftsman Sabre Saw  Not rated yet
This is a 1/3 hp (2.7 amp) sabre saw that I inherited from my grandfather. As best as I can tell, it is from the late '50s to mid '60s. It was made in ...

Vintage Sears Sabre Saw  Not rated yet
I have this little sabre saw which has been kicking around for many years. I believe it came from my grandfather's house. It runs like a champ, no variable ...

Craftsman 4" jointer 103.23340 Restored  Not rated yet
I was given this jointer after a friend of mine passed away. It was in his shed under a window that was broken. It had been rained on for several years....

Craftsman 4" jointer 103.23340  Not rated yet
I was given this jointer after a friend of mine passed away. It was in his shed under a window that was broken. It had been rained on for several years....

Craftsman Table Saw # 103.22161  Not rated yet
I have my father's old Craftsman table saw. It is model number 103.22161 and he bought it new around 1956. The control gear is worn out and I'm looking ...

Sears No. 6826 7" Circular Saw  Not rated yet
number 6826 Sears Roebuck-Simpson Sears ltd Pristine Hardly used with original blade

WANTED: Fence for 4 3/8" Craftsman jointer 103.23340  Not rated yet
Above note says it all. I need a fence for the above jointer-or just the clamp part! Help me salvage a good old jointer! It's way too good for the scrap ...

Craftsman 10'' Table Saw - Model No. ?  Not rated yet
Got this table saw for free. It took 2 weeks to remove the rust and free the adjusting mechanisms. Now it runs like a champ.
It is a direct drive.

The ...

Craftsman 8-inch Table Saw  Not rated yet
Old cast Iron saw, with homemade table model #103.0206 I Plan on selling it. Does anyone know the value of it?

Craftsman Titlting Arbor Table Saw Model 103.22160  Not rated yet
I have a working table saw and was wondering what the market is for this item (103.22160) and dollar value. Thanks Dave.

Craftsman (King Seeley Corp.) Planer Model # 103.23340  Not rated yet
This is the planer next to the 8" tablesaw that I posted the pics of earlier. Also called Jointer.

Craftsman (King Seeley Corp.) 8 Inch Table Saw  Not rated yet
My dad had this table saw and an old Craftsman planer model # 103.23340 under a shed and I decided to take it home and see if it was in working order and ...

Craftsman (King Seeley Corp.) 8" Table Saw Model# 103.22160  Not rated yet
My dad had this table saw and an old Craftsman planer model # 103.23340 under a shed and I decided to take it home and see if it was in working order and ...

Craftsman (King Seeley) Model 8" Table Saw  Not rated yet
Help I have this working saw the previous owner added extensions to the table 12" on each side. I would like to sell this, I was told a 10" blade would ...

Craftsman Radial Arm Saw Model 113.29942  Not rated yet
My dad gave me an old sears radial arm saw a couple of years ago so i could build some shelves in my family room.

Well I didn't get the handyman gene ...

Dunalp Model #101.06242  Not rated yet
Looking for parts to complete restoration. Need (1) L2-17 cup center and (2) 9-147 center points. If anyone has these for sale or know where i can purchase ...

Tale saw....10"  Not rated yet
I have inherited a table saw that was made and sold at Sears in 1948. It still has a very good motor and blades but there is only one problem. I don'...

Craftsman Shaper model #113.23929l  Not rated yet
I just bought a craftsman shaper model 113.239291 or 113.23929L and can't find it anywhere. HELP!!!, I want to buy some bits for it and use it today.

Craftsman Hand Plane 18"   Not rated yet
This flea market find is a Craftsman 18" plane with corrogated sole in excellent condition. The only markings other than "Craftsman" is the number 5268....

Craftsman model 113.21861 Cast Iron Jointer  Not rated yet
I received this jointer and corresponding motor (without the stand) from a neighbor and have a question about it. It has a knob on the right side that ...

Craftsman Model 103 Drill Press, Base Question  Not rated yet
Hello, This drill press is currently mounted to a craftman tool stand that has a table saw built in to it. Its really taking up a lot of space in my basement ...

Old Craftsman Drill Attachment  Not rated yet
Any one know any thing about this thing? I found it in a box of junk and it still works. It is made of brass,and the only thing written on it is Craftsman,...

24" Craftsman level  Not rated yet
I have a 24" aluminum beam-type Craftsman level that is about 50 years old and in decent shape however the glass and vials are hard to read due to dust ...

Info on Craftsman Table Saw Model # 113.29991  Not rated yet
I would like to have some information on the year of this craftsman table saw model # 113.29991 above the model number there is a number 1161?

Thank ...

craftman vintage table saw  Not rated yet
I'm not sure of its age. It is cast iron and might be 40 years old, or so.

It needs some repair, but I suspect that a collector might be able to restore ...

Craftsman Table Saw - Model #109-22620  Not rated yet
My husband was given this saw on friday by his boss. his boss knew my husband would restore it and get it running. it originally belong to his bosses ...

Craftsman Band Saw Model #113.248440  Not rated yet
We are looking for an owners manual.

Craftsman vintage 10" table saw Model# 113.27520 looking for some parts  Not rated yet
This saw was handed down to me by my grandfather, who was a cabinetmaker by trade so it has had plenty of use and it has been modified pretty heavily through ...

Craftsmen table saw  Not rated yet
Can anyone tell me what year or vintage this table saw is. I have never seen one before?
e-mail me at shawn@itol.com

Craftsman Shaper Model 101.23810  Not rated yet
I just bought an original owner, It was cleaned and lubed, motor is original 1/2hp runs excellent,the diameter spindle size is 1/2", also I have a delta ...

Craftsman Tablesaw 103-0214  Not rated yet
This is a great old 7" saw that my dad had. Still workd great but I need a couple of parts to make it right. I need a correct miter for it. The one I have ...

scroll saw attachment model 605 29521  Not rated yet
I have aquired an old craftsman table saw, model 103 22180, and with it is a scroll saw that, I believe, attaches to the arbor. The scroll saw looks like ...

Copper Combination Tool Box  Not rated yet
I found an old copper craftsman tool box with two sliding drawers and a lid that pops up. I am wondering what the history is and if it is worth anything....

Vintage Antique Craftsman Electric Drill   Not rated yet
A very old craftsman drill, still works very well... was wondering what year, what model number it is? and just some information on the drill. It looks ...

CRAFTSMAN "100" 10" Table Saw  Not rated yet
Hi. I picked up this saw along with other tools from the cabinet shop I worked for,as they were going out of business,for about $4oo. It has a Dayton 3hp ...

Craftsman Corrugated Bottom 14 inch Jack Plane No. 3747  Not rated yet
Am considering starting a plane collection following the gift of a few old tools fell in my lap. I was surprised to see how beautiful and with what care ...

Wood Lathe Model 103.23180  Not rated yet
I have this wood lathe. Craftsman. Has a GE motor. Was my fathers. In great condition for age. Have 'operating instructions' as well. Can you tell me best ...

craftsman saw model number 207.25601  Not rated yet
Bought this saw at a yard sale. Can't find anything on it online. Has craftsman red tag on the back of a cast aluminum shell. Tag reads 115v.ac/dc 13.8 ...

Old Craftsman Table Saw Stand  Not rated yet
I recently got rid of my grandfathers table saw - I couldn't justify keeping it around given limited space and the fact that I have a new contractor saw....

Vintage Craftsman Bench Top Drill Press  Not rated yet
Not sure about its age. It's serial number is 103.23640. I am willing to sell. Asking $200. Email me (ray . ragan @ gmail . com) remove the extra spaces....

6" jointer, 12" band saw, radial arm saw  Not rated yet
I was fortunate enough to inherit a number of vintage Craftsman shop tools, namely a jointer, radial arm saw, 12" band saw (haven't picked it up
yet so ...

Sears Scroll Saw 103.23390  Not rated yet
Just picked up old Sears scroll saw 103.23390. Saw works, but looking for manual to help rebuild and lubricate. First project .... Wiring, especially ...

craftsman 8' rip fence  Not rated yet
I am looking for a craftsman 8' rip fence #11324282. please contact me YUMMYBEAR@SHAW.CA or 250-898-8940 ask for ken

Atlas Model 3020 Table Saw  Not rated yet
I recently obtained this tablesaw (Atlas Model 3020) as a gift from a very dear old friend's daughter after he had passed away. The unit is in excellent ...

Old Craftsman Table saw  Not rated yet
Craftsman Table Saw
110 volt ½ hp model # 1156342
I want to know what it is worth and where to sell it.

Table-top belt-sander   Not rated yet
My brother found this a few days ago and thought I might find it useful. It has no markings other than two Craftsman decals. It is apparently designed ...

Sears Sabre Saw Model Number 315.27941  Not rated yet
The building next to the shop where i work is cleaning out.So lunch time i peek in the dumpster, i see this box, i climb in, i look at the box; It reads ...

14 Inch Jigsaw  Not rated yet
Help! I am not sure if this is Craftsman, as there are no makers marks on it. In the plate that covers the gearbox is cast "14 Inch Jigsaw". That's it....

Craftsman radial 100 Radial -Arm saw 10 inch  Not rated yet
Looking for a base similar to what is displayed in the manual(copyright 1969) I purchased. They show a basic stand for 10 inch only with steel drawers ...

Miter box model 881.36303 and kromedge 26" satin cut miter saw  Not rated yet
Belonged to my father-in-law. We used it to cut crown moulding in our den so it does work ok. Tried to give it to someone who was making renovations in ...

Sears Craftsman 3/8" Drill  Not rated yet
My Dad gave me this aluminum cased power drill a while back and told me it was my Great Grandfathers drill. I never met the man but I love that I have ...

Vintage Craftsman Belt and Disc Sander  Not rated yet
This dusty old relic was a gift. As you can (barely) see, it's marked "Sears Roebuck and Co." not Craftsmen, however I assume it qualifies. Any information ...

Vintage Craftsman Radial Arm Saw 2  Not rated yet
My father left me this radial arm saw and i am wanting to sell it. I would like to know what it is worth before i do. Could anyone give me an aproximate ...

Palmgren Rotary Cross 8" Slide table  Not rated yet
This slide table is in very good condition. It is still in the original shipping wooden box,(no lid) also with shipping labels. I believe this item to ...

Craftsman Turning tools  Not rated yet
Set of 8 Craftsman turning tools. Dark red/brown handles in a black case with velvet lining.

8" Circular Saw  Not rated yet
A friend of mine gave me this saw that he found on the garbage, would love to know how old this streamlined baby is.

Made by J A Vance & Co in Salem NC  Not rated yet
This a vintage 4FT Planer Made in Salem NC before it was incorpated into Winston Salem NC, which is better known was Old Salem its a part of history been ...

Craftsman 16" Bandsaw  Not rated yet
This is a recently acquired bandsaw which appears to be pre 1943 which I plan to restore. It is resonably complete and I have no information at all about ...

Craftsman Model "100" Table Saw  Not rated yet
This is an old Craftsman Model 100 table saw. It is definitely not restored, but is in use as a table saw as well as a general work surface daily. I replaced ...

Craftsman Bench Saw - Model 103.22161  Not rated yet
I recently upgraded my tablesaw which left no room in my garage for my vintage Craftsman Bench Saw. Build circa 1956, this table saw has been a work horse ...

Model 118. 2201 Duplicator?  Not rated yet
I bought this at an estate sale. Tags says Model 118. 2201 Sears Roebuck & Co. Just wondering what it was called when sold and the age of this machine....

craftsman turning chisels (wood lathe tools)  Not rated yet
I have about 8 either balanced or professional turning chisels made by Craftsman in the original blue wooden box that have never been sharpened.
I have ...

CRAFTSMAN TABLE SAW model#101.02142  Not rated yet
Like get some information,manual on this don't know where to look. WORKS GREAT!! Missing some parts. jr647@yahoo.com

Model 103.0305 Drill Press  Not rated yet
I just acquired a Model 103.0305 Drill Press and the Quill Tension spring is boken. I have tried to find a replacement part on the internet via Sears but ...

Craftsman4" Jointer Model # 103.21861  Not rated yet
Just bought this, and wanted to know how old it is and if you can still get parts for it and/or a manual. Runs good but needs new blades.

Ball Bearing Shaper  Not rated yet
Made by the Herbert Mfg. Co and sold at Sears between 1933 and 1935. Has Craftsman marking on base with patent pending. After leaving Sears, the shaper ...

1)sears 12-inch band saw/sander 2) craftsman router double insulated 3) sears 6-1/8 inch jointer-planer   Not rated yet
1) I have one 12 inch band saw/sander model no. 113.243411 with legs & motor. It was purchased I think around September of 1979. It works beautifully....

109.22620 TABLE SAW  Not rated yet
Picked this saw up from Craigslist for $50. Seems to have all the accessories but the motor is not original and seems to not be set up well creating vibration ...

Drill Press Combo Unit  Not rated yet
I inherited my Grandfathers Drill press,Shaper, mortiser from my uncle. It is a model no. 101.03622,Craftsman. I looked at many of the photos on this ...

Craftsman 13 or 14 inch Bandsaw, belt sander & aluminum oxide wheel circa 1935  Not rated yet
I got these some 30 years ago from a friend who was cleaning out his grandfather's house. The grandfather made musical instruments back in the 20's, 30'...

Old Craftsman jigsaw -- cast metal  Not rated yet
I've go this old, fully functional craftsman jigsaw (model # 315.27981). The only problem is that it's missing the guideplate on the bottom. Anyone know ...

Craftsman Bench Saw 103.21041  Not rated yet
I inherited my grandfather's Craftsman Bench Saw (8 inch, Model #103.21041). Unfortunately after spending years in the garage at my parents and then at ...

Table Saw  Not rated yet
Help me ID this craftsman table saw. There is no data plate on the unit.

I am not a vintage tool collector and know little about this unit. I Googled ...

Table saw and Jointer  Not rated yet
I have a Sears Craftsman large table cast iron 10" table saw original grey paint w/homade stand. I also have brown peckle painted Sears and Roebuck 6" jointer ...

Table Saw with Bench  Not rated yet
It's not that old but I built the table and router set for it. Just started a new table with Cabinets. It should be done by the end of summer(wife permitting)...

Craftsman Jointer  Not rated yet
6" Craftsman jointer. Model 113 206 932
Ser No 5108 P0398. Need manual to adjust infeed table. Also calibrate fence to set at 90 degrees to both tables....

Craftsman Deluxe Plane 3743  Not rated yet
I have a Craftsman Deluxe Plane 3743 in the original box. Just wondering how much it's worth? It's in very good condition. I have someone interested in ...

Craftsman Round disc   Not rated yet
It screws to a workbench has a round disc like thing on top with a bold through the top and has a top disc likr thing with a wing nut. It has no numbers ...

Craftsman 103-23070 Wood Lathe  Not rated yet
Craftsman 103-23070 Wood Lathe

In May of 2008 I came across a couple of great deals that I just couldn't pass up. One of which was the purchase of 2 ...

Craftsman Wood Lathe model 101.06242   Not rated yet
I got this at an Estate and would like to know any information about it. Is it a generally good lathe does it have any issues, etc... It seems to be ...

Sears and Roebuck lathe model 101.06242  Not rated yet
Hello, I have been reading a little about my lathe on the web. I have a question about the spindle. I have measured/counted the threads and it seems to ...

1963 Sears Industrial Rated Power Hand Saw  Not rated yet
I bought this electric handsaw at an auction for $22.00. The saw was still the box(worn). In the box was the parts list, wrench, rip guide, "How to use ...

23 inch scroll saw model #149236160  Not rated yet
I am looking for information to purchase a upper blade holder which is discontinued. Can any one help? 315-456-8068. Steve.

23 inch scroll saw model #149236160  Not rated yet
I am looking for information to purchase a upper blade holder which is discontinued. Can any one help? 315-456-8068. Steve.

Sliding Arbor Table Saw w/fixed Miter Gauge  Not rated yet
I don't know much about it. I hope someone else does and tell me what i have. heavy stamped sheet metal construction, sturdy, art-deco legs. it has a long ...

Craftsman Cutoff Saw Model no.429 24390  Not rated yet
This is some sort of chop, cutoff or miter saw that can be turned and has gauge for angles. It still works. motor runs. not sure how much is original of ...

Craftsman drill powered reciprocating saw  Not rated yet
I found this item at a garage sale years ago, a man had built an airplane in his garage and this is one of the tools he used. I haven't been able to find ...

Craftsman Band Saw Model 113.248440  Not rated yet
I have this older tilt head 12" Craftsman band saw and I'd like to know when it was manufactured.
I have heard that the date is in the serial number but ...

Craftsman 24" Scroll Saw  Not rated yet
I recently acquired an old Craftsman scroll saw. Some of the details: 24" throat, 4 pully sizes, with tilt table and oil sump for saw drive mechanism....

craftsman miter box saw  Not rated yet
Have my dad's Craftsman miter box, no doubt vintage 50's. It is a red, heavy framed item that he did his carpentry finish work with. Works great, still....

Craftsman Scroll Saw - Great Restoration!  Not rated yet
I do not want to sell this, I recently did my best to restore it and am wondering what year it may be, anyone able to help, my e-mail is jhason2@yahoo....

Vintage 1960s Craftsman Jointer  Not rated yet
Got it from a lady whos husbond had passed away. Motor replaced with newer baldor enclosed type. Missing the swing guard item # 21170 also needs blades ...

Craftsman Drill Press --- Want tilt table  Not rated yet
I have an old Craftsman floor model drill press (113.24590) that is probably at least 30 years old. The table has a flat area in the rear which was designed ...

Craftsman (King Seeley) Table Saw 115.6963  Not rated yet
I bought an antique table saw and want to purchase the manual so I can get it running. The person I bought it from says it works...But I want to recondition ...

18" Model 103.23151 Jig / Scroll saw  Not rated yet
Have 18" Model 103.23151 jig saw in very good condition and have no clue what value might be. With 1725 rpm GE 1/4 HP motor. Am considering selling. Works ...

Craftsman 6 inch lathe model 113.12540  Not rated yet
I just started working with this lathe. I have noticed that the lever to engage the gears slips and the gears won't fully engage. I am afraid of ever tightening,...

23" scroll saw  Not rated yet
looking for parts that Sears has discontinued. Model # 149.236160 The part # is 4670-056-70 Bellows

Sears Model 103.23150 18" Jig Saw  Not rated yet
I have this machine if anyone is interested in it I'm in Fl let me know. it runs smooth a nice machine I have no longer use for.
rcasails@gmail.com

Craftsman 8" Model# 113.242820 Part #62071  Not rated yet
I am looking for a Craftsman Model# 113.242820 8" Rip Fence Part #62071. Please contact me at marie2008@yahoo.com

Regards,
Jack Noah
Rome, GA

Table Saw, Joiner and Shaper  Not rated yet
Trying to find out what year this Joinerwas made. I have several other Sears items.

10" Belt driven Table saw  Not rated yet
For Sale , Not sure of the age or model.
I inherted it. But it is a King-Seeley / Craftsmen

contact me

Bob H

bobhomemax@comcast.net

6" Jointer  Not rated yet
I would like to sell this to someone who can appreciate it

Dove tailed oak machinist tool box  Not rated yet
Oak box is in mint condition, lined with green felt, measures 30" wide, 12 1/2" high, 7 drawers in varying depths from 1 1/4" to 2 1/4" deep. hardware ...

Sears Modle # 113-23920C Shaper. Serial # 1077P0086  Not rated yet
I was given it as a gift from some one retiring and moving out of Ontario

I have added a new 3/4 horse 230 amps moter

I have no manual or Shaper ...

1952 Craftsman (King Seeley) 4" Jointer Model 103.23220  Not rated yet
This is a Craftsman 4 3/8" Jointer-Planer manufactured by the King Seeley Corp. for the Craftsman brand. The blade guard and fence lock handle are not ...