Jet Cabinet Table Saw

The Jet Cabinet Table Saw.... Any serious woodworker recognizes that the most important tool in the workshop is a good heavy duty table saw. There are many good table saws on the market that will perform admirably in the home shop, but for me, the Cabinet Table Saw is the Cadillac of them all.

The Jet cabinet table saw is a workhorse. It is made to run all day long and is the best overall choice for the hobbyist or small shop owner. While more expensive than portable, contractor, and hybrid table saws, the cabinet saw has plenty of advantages.

The motors in these saws have plenty of power for just about any job in the shop. They are typically equipped with a 3 to 5 horsepower motor which will provide enough power to handle any wood up to the full cutting depth of about 3 1/8 inches.

Cabinet saws are built around a stout main frame and enclosed cabinet base. The trunnion assembly is heavy duty and mounted to the frame separately from the table top. This makes adjusting the alignment of the blade and miter slots very easy and convenient.

The best of the cabinet saws are heavy with cast iron or steel table tops. This extra weight means less vibration and more rigid blade mounting resulting in smoother cuts.

The links below are to information about Jet Cabinet Table Saw in their current line of tools.

 

DELUXE XACTA® SAW 3HP, 1Ph, 50'' Rip

If you've ever wondered about what a table saw can really do, look no further. Introducing the new JET® 10'' DELUXE XACTA® SAW. The Quick release riving knife and integrated arbor lock keeps the operator safe and more efficient. The DELUXE XACTA® SAW offers an upgraded Poly-V belt drive system for smooth operation and optimal power transfer, a fully shrouded blade for highly efficient dust collection. The 26'' x 30'' wings and deeper table gives you even more cast iron to work on. A built-in 12.5'' x 18'' x 4 '' storage drawer sealed from the cabinet keeps your necessities within arms reach, also includes an on-board fence and miter gauge storage.

DELUXE XACTA® SAW 3HP, 1Ph, 50'' Rip

DELUXE XACTA® SAW 3HP, 1Ph, 50

 

JET - JTAS-10XL50-1PK, 3HP, 1Ph XACTASAW Left w/ 50'' Fence, Table and Legs

  • Left tilting blade for greater accuracy and safety
  • Choice of 3 HP, single phase; 5 HP, single or three phase
  • Comes standard with the XACTA FENCE II 30" or 50" Commercial
  • Both fences also offer a 12" rip capacity to the left of the blade
  • Large precision-ground 27" x 40" cast iron table with two extension wings
  • Reinforced steel enclosed cabinet
  • Built-in slanted cabinet floor leading toward the standard 4" steel dust port
  • Convenient front left rail-mounted magnetic on/off switch
  • Chrome-plated handwheels
  • Hinged steel motor cover
  • Totally enclosed, fan-cooled motor Wide stance trunnion design to eliminate vibration and insure perfect blade alignment
  • Three matched v-belts mounted between the two arbor bearings for longer bearing life and greater stability
  • T-slotted table with precision mitre gauge
  • See-through blade guard with splitter and anti-kickback pawls
  • One-piece precision ground arbor
  • Standard Equipment XACTA FENCE II Precision fence system
  • Mitre gauge
  • Blade guard/splitter
  • Cast iron extension wings
  • Cabinet-style stand
  • Dust port
  • XACTA-LIFT All JTAS-10 Kits are available with the XACTA-LIFT router insert and deluxe fence built in.

JET - JTAS-10XL50-1PK, 3HP, 1Ph XACTASAW Left w/ 50'' Fence, Table and Legs

 
JET - JTAS-10XL50-1PK, 3HP, 1Ph XACTASAW Left w/ 50

 

Jet XactaSaw 5HP Table saw, 1Ph, 50'' Rip with Downdraft Table and Leg Set

  • EXCLUSIVE commercial XACTA® Fence II with T-square design
  • JET downdraft table with exclusive design (patent pending), draws harmful dust particles away from the user without obstructing the user’s movement or productivity
  • Cast iron wings to increase work surface and support area
  • Three matched V-belts deliver full power to the blade
  • Rail-mounted magnetic switch is easy to reach and provides overload protection
  • Hinged motor cover on cabinet gives quick access to the motor and belts
  • Heavy-duty chrome plated handwheels contribute to smooth trunnion/arbor movement
  • Built-in 4' port for dust collection
  • See-through blade guard with splitter and anti-kickback pawls helps protect operator while giving a clear view of the material being cut
  • Precision ground high luster cast iron table tops with front edge bevel for hassle-free workpiece positioning
  • Miter gauge with adjustable positive stops for accurate mitering
  • Powder coated paint for a long-lasting, chip-resistant finish
  • 5 Year Warranty

Jet XactaSaw 5HP Tablesaw, 1Ph, 50'' Rip with Downdraft Table and Leg Set

 
Jet XactaSaw 5HP Tablesaw, 1Ph, 50

 

Jet Deluxe Xacta Table Saw 3HP, 1Ph, 50'' Rip with Downdraft Table and Leg Set

  • EXCLUSIVE commercial XACTA® Fence II with T-square design
  • JET downdraft table with exclusive design (patent pending), draws harmful dust particles away from the user without obstructing the user’s movement or productivity
  • Quick release riving knife greatly reduces binding/kickback risk
  • Push button arbor lock (patent pending) for rapid blade change
  • Shrouded Blade increases dust collection efficiency
  • Standard 11'' left and right cast iron extension wings provides the largest table surface in its class
  • Poly-V drive belt system delivers efficient, quiet operation
  • Rail-mounted magnetic switch is easy to reach and provides overload protection
  • Enclosed cabinet with built-in sealed storage drawer
  • Hinged motor cover on cabinet gives quick access to the motor and belts
  • Deluxe miter gauge with adjustable positive stops and large soft grip handles provides large crosscutting capacity and accurate miters
  • Heavy-duty chrome plated handwheels contribute to smooth trunnion/arbor movement
  • Left tilt, wide stance heavy-duty trunnion for stability and smooth blade positioning
  • 5 Year Warranty

Jet Deluxe Xacta Table Saw 3HP, 1Ph, 50'' Rip with Downdraft Table and Leg Set

 
Jet Deluxe Xacta Table Saw 3HP, 1Ph, 50

 

Jet Deluxe Xacta Table Saw 3HP, 1Ph, 50'' Rip with Downdraft Table and Leg Set

  • EXCLUSIVE commercial XACTA® Fence II with T-square design
  • JET downdraft table with exclusive design (patent pending), draws harmful dust particles away from the user without obstructing the user’s movement or productivity
  • Quick release riving knife greatly reduces binding/kickback risk
  • Push button arbor lock (patent pending) for rapid blade change
  • Shrouded Blade increases dust collection efficiency
  • Standard 11'' left and right cast iron extension wings provides the largest table surface in its class
  • Poly-V drive belt system delivers efficient, quiet operation
  • Rail-mounted magnetic switch is easy to reach and provides overload protection
  • Enclosed cabinet with built-in sealed storage drawer
  • Hinged motor cover on cabinet gives quick access to the motor and belts
  • Deluxe miter gauge with adjustable positive stops and large soft grip handles provides large crosscutting capacity and accurate miters
  • Heavy-duty chrome plated handwheels contribute to smooth trunnion/arbor movement Left tilt, wide stance heavy-duty trunnion for stability and smooth blade positioning
  • 5 Year Warranty

Jet Deluxe Xacta Table Saw 3HP, 1Ph, 50'' Rip with Downdraft Table and Leg Set

 
Jet Deluxe Xacta Table Saw 3HP, 1Ph, 50

 

DELUXE XACTA® SAW 5HP, 1Ph, 50'' RIP

If you've ever wondered about what a table saw can really do, look no further. Introducing the new JET® 10'' DELUXE XACTA® SAW. The Quick release riving knife and integrated arbor lock keeps the operator safe and more efficient. The DELUXE XACTA® SAW offers an upgraded Poly-V belt drive system for smooth operation and optimal power transfer, a fully shrouded blade for highly efficient dust collection. The 26'' x 30'' wings and deeper table gives you even more cast iron to work on. A built-in 12.5'' x 18'' x 4'' storage drawer sealed from the cabinet keeps your necessities within arms reach, also includes an on-board fence and miter gauge storage.

DELUXE XACTA® SAW 5HP, 1Ph, 50'' RIP

DELUXE XACTA® SAW 5HP, 1Ph, 50

 

DELUXE XACTA® SAW 5HP, 1Ph, 30'' RIP

If you've ever wondered about what a table saw can really do, look no further. Introducing the new JET® 10'' DELUXE XACTA® SAW. The Quick release riving knife and integrated arbor lock keeps the operator safe and more efficient. The DELUXE XACTA® SAW offers an upgraded Poly-V belt drive system for smooth operation and optimal power transfer, a fully shrouded blade for highly efficient dust collection. The 26'' x 30'' wings and deeper table gives you even more cast iron to work on. A built-in 12.5'' x 18'' x 4 '' storage drawer sealed from the cabinet keeps your necessities within arms reach, also includes an on-board fence and miter gauge storage.

DELUXE XACTA® SAW 5HP, 1Ph, 30'' RIP

DELUXE XACTA® SAW 5HP, 1Ph, 30

 

DELUXE XACTA® SAW 3HP, 1Ph, 30'' Rip

If you've ever wondered about what a table saw can really do, look no further. Introducing the new JET® 10" DELUXE XACTA® SAW. The Quick release riving knife and integrated arbor lock keeps the operator safe and more efficient. The DELUXE XACTA® SAW offers an upgraded Poly-V belt drive system for smooth operation and optimal power transfer, a fully shrouded blade for highly efficient dust collection. The 26'' x 30'' wings and deeper table gives you even more cast iron to work on. A built-in 12.5'' x 18'' x 4'' storage drawer sealed from the cabinet keeps your necessities within arms reach, also includes an on-board fence and miter gauge storage.

DELUXE XACTA® SAW 3HP, 1Ph, 30'' Rip

DELUXE XACTA® SAW 3HP, 1Ph, 30

 

JET - Model JTAS-12X50-5/1PK, 5HP, 1Ph with 50'' XACTA FENCE, Table and Legs

  • 12" XACTA SAW Right Includes market-leading precision fence system: XACTA FENCE II
  • Wide stance trunnion design insures perfect blade alignment
  • Large precision-ground 29" x 44" cast iron table with two extension wings
  • Choice of 5 HP, three phase motor, or single phase
  • Three matched v-belts deliver full power to the blade 4" dust port allows easy connection to a dust collection system
  • Convenient rail-mounted magnetic switch provides overload protection Hinged motor cover allows quick access to the motor and belts
  • Beveled front table edge allows smooth crosscutting operation
  • T-slots and deluxe mitre gauge allow large crosscutting capability
  • Adjustable positive stops on mitre gauge at 45 degrees and 90 degrees assure accuracy
  • See-through blade guard with splitter and anti-kickback pawls are easily removed for non-through cutting

Standard Equipment

  • XACTA FENCE II
  • T-style mitre gauge
  • Blade guard/splitter
  • Solid cast iron extension wings
  • One-piece steel cabinet
  • 4" dust port

Blade not included PK models include 29" x 36" wood accessory table & support legs

JET - Model JTAS-12X50-5/1PK, 5HP, 1Ph with 50'' XACTA FENCE, Table and Legs

 
JET - Model JTAS-12X50-5/1PK, 5HP, 1Ph with 50

 

JET - JTAS-10X50-1PK, 3HP, 1Ph XACTASAW Right w/ 50'' Fence, Table and Legs

  • Includes choice of market-leading precision fence systems: XACTA FENCE II 30" or 50"
  • Commercial Wide stance trunnion design ensures perfect blade alignment
  • Large precision-ground 27" x 40" cast iron table with two extension wings
  • Choice of 3 HP, single phase, or 5 HP, single or three phase motor
  • Three matched v-belts deliver full power to the blade
  • 4" dust port allows easy connection to a dust collection system
  • Convenient rail-mounted magnetic switch provides overload protection
  • Hinged motor cover allows quick access to the motor and belts
  • Beveled front table edge allows smooth crosscutting operation
  • T-slots and deluxe mitre gauge allow large crosscutting capability
  • Adjustable positive stops on mitre gauge at 45 degrees and 90 degrees assure accuracy
  • See-through blade guard with splitter and anti-kickback pawls are easily removed for non-through cutting

Standard Equipment

  • XACTA FENCE II precision fence system
  • T-style mitre gauge
  • Blade guard/splitter
  • Solid cast iron extension wings
  • One-piece steel cabinet
  • 4" dust port
  • Blade not included

XACTA-LIFT All JTAS-10 Kits are available with the XACTA-LIFT router insert and deluxe fence built in. To order any JTAS-10 table saw with the XACTA LIFT kit replace the PK with RXK or saws with Deluxe XACTA FENCE II replace the DK with DXK. These saws will come standard with the precut accessory wood table, XACTA LIFT router insert, deluxe router fence and support legs

JET - JTAS-10X50-1PK, 3HP, 1Ph XACTASAW Right w/ 50'' Fence, Table and Legs

 
JET - JTAS-10X50-1PK, 3HP, 1Ph XACTASAW Right w/ 50

 

You may also be interested in these articles about table saws

Jet Table Saw Manuals
Jet Portable Table Saws
Jet Hybrid Table Saws
Jet Contractor Table Saws
Jet Cabinet Table Saws
Jet Table Saw Accessories
Jet Woodworking Tool Photos

How to Link to This Page

It will appear on your page as:

Jet Cabinet Table Saws

Custom Search

All Other Old Woodworking Tools Articles

Delta Homecraft Tools
Delta produced a series of woodworking machines for the homeowner called the Delta Homecraft Power Tools
Delta Homecraft Jointer
Delta homecraft jointer
Delta Table Saw Jointer Combination Unit
The Delta No. 34-500 8 inch Table Saw Jointer Combination machine offered a compact table saw jointer unit on one stand that used a single motor.
Delta Homecraft Shaper
The Vintage Delta Homecraft Shaper No. 43-110 performed all of the operations commonly done on larger more expensive shapers of its type.
Delta Homecraft Drill Press Model No. 11-100
The Vintage Delta Homecraft drill press was one of the most versatile tools in the wood shop. It wasn't limited to just drilling holes.
Delta Homecraft Band Saw
10 Inch Delta Homecraft Band Saw Model 28-110
Delta Woodworking tools at Old Woodworking Tools
Information, resources, photographs and more about Delta Woodworking Tools and Machinery.
Delta Unisaw - 10" Tilting Arbor Circular Saw 1949
The Delta Unisaw has been a mainstay of woodworking shops for the past 60 years.
Delta Band Saw Rip Fence
Delta Band Saw Rip Fence
Delta Band Saw (1949) Model No. 28-207
The Band Saw Restoration page is a place for you to share your old band saw restoration tips and stories and upload photos.
Delta Jointer 6 Inch
The Delta Jointer was the standard 6 Inch Jointers in shops of all types.
Delta Finishing Machine - 4" Belt & 12" Disc Sander
The Vintage Delta Finishing Machine No. 31-700 with a 4 Belt & 12 Disc was capable of performing 90% to 95% of all you finishing operations.
Craftsman Woodworking tools at Old-Woodworking-Tools.net
Information and resources about Craftsman Woodworking Tools and Machinery.
Woodworking Machine Manuals at Old Woodworking Tools
Publication reprints of vintage woodworking machine manuals that may be downloaded in a PDF format.
Craftsman Tool Manuals
Craftsman tool manuals and catalogs that can be downloaded for free.
Rockwell Tool Manuals
Download free Rockwell tool manuals and catalogs
Delta Tool Manuals
Download free Delta tool manuals and catalogs
Contribute Content to Old-Woodworking-Tools.net
Help contribute to Old-Woodworking-Tools.net
Share Your Woodworking Machine Photos
Share a photo or information about woodworking tools and machines.
Vintage Delta Tools at Old-Woodworking-Tools.net
Vintage Delta Tools: The Delta Mf. company made some of the most sought after and highest quality American made woodworking tools for many years. On this page you'll find photos, resources and information about some of those woodworking machines.
Vintage Craftsman Woodworking Tools and Machinery at Old-Woodworking-Tools.net
Information and photo sharing about vintage Craftsman tools and woodworking machinery. Share a photo of your vintage Craftsman tools.
Antique Woodworking Tools at Old-Woodworking-Tools.net
Information, photos, and information about antique woodworking tools, tool collecting, Stanely tools and much more.
Walker Turner Power Tools at Old-Woodworking-Tools.net
Walker Turner Power Tools: Photos, Information and resources about Walker Turner Woodworking Tools and Machinery.
Contact Us at Old-Woodworking-Tools.net
Contact us at Old-Woodworking-Tools.net
Woodworking Community
Join the Woodworking Community for discussion, sharing, networking and more!
Vintage Oliver Woodworking Machine Photos
Information and resources and photos of vintage Oliver Woodworking Machinery.
Delta 15" Utility Drill Press
Information and resources for the Delta 15 Utility Drill Press 1963)
Old Woodworking Tools
Old Woodworking Tools Blog - Information and resources and the latest articles posted about old woodworking tools.
Delta 43-205 Heavy Duty Shaper (1951)
Information and photos about the Delta 43-205 Heavy Duty Shaper. Includes model numbers, parts list, and machine manual.
Delta 1160 Table Saw
Information and photos of the Delta 1160 Table Saw. Includes description, parts list, recommened motors, and machine manual.
Delta 1426 Disk Sander
Information and photos about the Delta 1426 Disk Sander. This Delta woodworking machines was produced in 1939. Includes parts list, motor recommendations, and more.
Vintage Powermatic Tools
Share a photo of your vintage PowerMatic tools.
Jet Woodworking Tool Photos
Share a photo of your Jet Woodworking Tool Photos.
Powermatic Model 221 Planer
Information and photos of the Powermatic Model 221 Planer
Powermatic Model 66 Table Saw
Information and resources about the Powermatic Model 66 Table Saw
Boice Crane Woodworking Tools at Old-Woodworking-Tools.net
Boice Crane Woodworking Tools: Photos, Information and resources about Boice Crane Woodworking Tools and Machinery.
Boice Crane 14" Band Saw at Old Woodworking Tools
Infomation, resources, and photos of the Boice Crane 14
Table Saws
Information about table saws including the features found in bench, contractors, and cabinet saws, mobile and stationary saws. Also ncludes information and linked to vintage table saws as well as newer models.
Band Saws at Old-Woodworking-Tools.net
Information and resources about band saws.
General Woodworking Tools
Information and resources for General Woodworking Tools, table saws, band saws, jointers, shapers, sanders, etc.
Woodworking Tool Reviews
Read or write a review of the Woodworking tools listed here.
Old Woodworking Tools Network
A place for old woodworking tool enthusiasts to share photos, stories, and more
Woodworking Supplies & Equipment
Woodworking-Supplies & Equipment including tools, hardware, supplies, woodworking plans and more.
Wood Lathes
Information about wood lathes including a description of the features and considerations for purchasing one as well as links to a variety of vintage and modern wood lathes.
Jointer at Old-Woodworking-Tools.net
Photos, information and resources about the woodworking jointer. The jointer can machine a face or edge of a board perfectly flat and straight.
Delta Table Saw
Information and resources about the Delta Table Saw.
Radial Arm Saw at Old-Woodworking-Tools.net
Photos, Information and resources about the radial arm saw.
Scroll Saw at Old-Woodworking-Tools.net
Photos, Information and resources about the scroll saw, a popular woodworking tool for cutting curves and irregular shaped pieces.
Best Woodworking Shop Tips Contest 2010
Enter the Best Woodworking Shop Tips Contest and win a $100 gift card from Rockler Woodworking
Woodworking Shop Notes
Learn more about woodworking, tools, projects, supplies and more.
Old Woodworking Tools
Old Woodworking Machinery
Woodworking Machine Manufacturers
Information and resources woodworking machine manufacturers.
Old Woodworking Tools
Information and resources about the drill press, one of the most versatile pieces of equipment in the shop.
Belt and Disc Sander at Old-Woodworking-Tools.net
Belt and Disc Sander - Information, photos, and resources about abrasive tools for woodworking including the belt and disc sander.
Wood Shaper at Old-Woodworking-Tools.net
Wood Shaper - Photos, Information and resources about the wood shapers also known as the spindle shaper.
Stanley Planes at Old Woodworking Tools
Photographs and information about Stanley Planes.
Stanley Hand Planes
Information, photos, and resources about Stanley Hand Planes.
Craftsman Table Saw Parts
Information, photos, and resources about Craftsman table saw parts.
Stanley Planes | Old-Woodworking-Tools.net
Share a photo of your collectable Stanley Planes.
Share Your Vintage Craftsman Table Saws
Share a photo of your vintage Craftsman drill press.
Share Your Vintage Craftsman Table Saws
Share a photo of your vintage Craftsman band saws.
Share Your Vintage Craftsman Table Saws
Share a photo of your vintage Craftsman Scroll saws.
Share Your Vintage Craftsman Table Saws
Share a photo of your vintage Craftsman table saws.
Vintage Delta Table Saws at Old Woodworking Tools.net
Information, resources, machine manuals, and photos of vintage Delta table saws.
Vintage Delta Band Saws at Old Woodworking Tools.net
Information, resources, machine manuals, and photos of vintage Delta band saws.
Vintage Delta Radial Arm Saws at Old Woodworking Tools.net
Information, resources, machine manuals, and photos of vintage Delta radial arm saws.
Vintage Delta Drill Press at Old Woodworking Tools.net
Information, resources, machine manuals, and photos of vintage Delta Drill Presses.
Vintage Delta Shapers at Old Woodworking Tools.net
Information, resources, machine manuls and photos of vintage Delta table shapers.
Vintage Delta Lathes at Old Woodworking Tools.net
Information, resources, machine manulas and photos of vintage Delta lathes.
Vintage Delta Jointers at Old Woodworking Tools.net
Information, resources, machine manuals, and photos of vintage Delta jointers.
Vintage Delta Scroll Saws at Old Woodworking Tools.net
Information, resources, machine manuals, and photos of vintage Delta scroll saws.
Old Woodworking Tool Parts for Sale
Old Woodworking Tool Parts for Sale - See our store for parts from vintage Delta and Craftsman woodworking tools and much more.
Stanley Woodworking tools at Old Woodworking Tools
Information, photographs, and the history of Stanley Woodworking Tools.
Stanley Planes at Old Woodworking Tools
Photographs and information about Stanley Planes.
Sargent Woodworking Tools
Information, photos, and resources about Stanley Hand Planes.
Stanley Woodworking Tools
Information, photos, and resources about Stanley Hand Planes.
Woodworking Tools for Sale
Antique woodworking tools for sale.

Site Build It!

This site proudly build with Site Build It!

Powered By SiteBuildIt

 

Bluehost.com Web Hosting $6.95 

 

[?] Subscribe To This Site

XML RSS
follow us in feedly
Add to My Yahoo!
Add to My MSN
Subscribe with Bloglines