Vintage Walker Turner Tools

Walker-Turner 24" The Drive Line Series Model SJ-30 Serial No. SJ 37-69-B 
[Walker-Turner 24" The Drive Line Series Model SJ-30,Serial No. SJ 37-69-B which are stamped into the metal of stand behind head . Measures 24" Throat ...

16" Walker Turner Band Saw 
I purchased it as surplus from the State of Washington. It is in amazingly good shape. One or more chunky paint jobs and a missing side tower cover. I ...

Walker Turner 24" Scroll Saw Direct Drive Model- MJ744  
Just bought this saw at a public sale. They didn't have any paperwork with it. The saw is in great condition. Does anyone know where I can get manuals ...

Walker Turner 16 " Band Saw 
Has been in my basement for ever looks like from the early 1900..wondering what the market value for this would be? I will get the serial # if needed......

20" Walker Turner Drill Press Model 1100 
This drill press was setup with a bowling ball drill fixture which nicely protected the table which does have a few dings from dropped bits etc. It is ...

Walker Turner (Drill Press) DP-101 
I bought this at a garage sale in Bremerton, WA about 20 years ago. I have used it a few times, but I noticed that it had been repaired, where the drill ...

Walker Turner Grinder 
I just picked up this Walker-Turner Driver Line grinder... it seems to take a 5" wheel on the left and an 8" wheel on the right. It also looks like perhaps ...

BN730 12 inch 
I am still using, on a quite regular basis, the 12" Walker Turner Driver band saw....

Presently (2008) cutting up a pile of 19mm Tasmanian Oak for my ...

SKF 12" band saw The Driver Line 
Left to me when my wife's uncle passed, along with a Dalton T-L lathe patent 1922.
Everything seems to work well.
Would appreciate a fair market value ...

Walker-Turner 25" drill press- Model 900 made approx 1940 
My dad got this in Denver just after WWII started. He was told it was the last one which could go to the civilian market. From then on they would go ...

Walker Turner Lathe & sander 
After my Dad passed away, I inheretd his shop full of beautiful old tools. From old Bailey planes to a great old Walker Turner lathe. As it is, I can't ...

Walker Turner Floor Mount Drill Press 
The first picture I sent was terrible so here's a better one. I found this for $35.00. Very rusted but the internal machined parts and essentials are ...

Walker Turner Scroll Saw  Not rated yet
Purchased at garage sale. Refurbished 2009. Non-original Hoover 1/3 HP Motor, Shop made Stand.

Walker Turner BN1135 Bandsaw  Not rated yet
Walker Turner Bandsaw probably from the early 40's. Purchased on fleabay. Refurbished in 2005. Replaced all bearings, new tires, shop made reproduction ...

Vintage Walker Turner 10" Table Saw  Not rated yet
Found this vintage Walker Turner 10" Table Saw on Craigslist. It's the full cabinet version of the saw with large cast iron top. It rips up to 23 1/2 inches ...

Drill press and jointer.  Not rated yet
In addition to my Dad's 8" tilting table saw, I have two other Walker-Turner Driver Line power tools of pre-war vintage.

I have a 1/2" drill press with ...

8" Driverline tilting table saw.  Not rated yet
I have been using the 8" table saw my father purchased new since I was old enough to do so and keep all my fingers...

When Dad died in 1980 all his ...

Walker-Turner 24" The Drive Line Series Model SJ-30 Serial No. SJ 37-69-B  Not rated yet
[Walker-Turner 24" The Drive Line Series Model SJ-30,Serial No. SJ 37-69-B which are stamped into the metal of stand behind head . Measures 24" Throat ...

Walker-Turner 24" The Drive Line Series Model SJ-30, Serial No. SJ 37-69-B  Not rated yet
[Walker=Turner 24" The Drive Line Series Model SJ-30, Serial No. SJ 37-69-B which are stamped into the metal of stand behind head . Measures 24" Throat ...

12" Bench Band Saw  Not rated yet
Cast iron frame with no name or model other than "SKF equipment ball bearing" Mounted on homemade mount with back gear to slow the RPM. Back gear shaft ...

Turner Walker Driveline 10Inch table saw   Not rated yet
Purchased this saw off Craigslist cleaned it up but could find no serial or model numbers. It will take a 10 inch blade so I assume it is a 10 inch saw....

TA1165 10" Tilting Arbor Saw - "Betsy"  Not rated yet
I only think this is a TA1165 10" Tilting Arbor Saw... it's a cabinet saw, 10", with tilting arbor. When I got it, it was stenciled "U.S.Navy" on the ...

Walker Turner Drill Press  Not rated yet
Here is another picture of the Walker-Turner four gang drill press.

Walker Turner Drill Press  Not rated yet
I just bought a Walker Turner Drill Press at an auction ($200). It is actually four drill presses mounted on a cast iron table. The drills run guietly ...

Walker Turner Drill press Ser.No. 51 M2C  Not rated yet
I was given then bench top drill press by a friend who acquired it from the estate of a tool and dye maker. It works perfectly and is in good condition....

Walker-Turner 700 Series Jig Saw  Not rated yet
I recently purchased this from a friend for $50.00. It runs beautifully. There is no model # on it. I have been able to find the instruction sheet No....

6 inch Jointer  Not rated yet
I recently acquired a 6 inch Walker Turner Jointer and am having trouble finding the model number. There is a label plate having the serial number as ...

I have a model #BN1135 band saw S/N 22-639  Not rated yet
I justed purchased this band saw but I need some parts. Back blade guard,fence and parts list. Other than a little rust this saw seams to be good working ...

drill press- The Driver Line- SKF  Not rated yet
How does one put a new dive belt on that runs from the shaft turning the chuck to the motor.
The front drive has a 3 speed wheel as the motor has a one ...

BN1135 Band Saw  Not rated yet
I picked it up at an auction in Vermont. I knew the name and the quality that came with it.
Have a few questions though.

1. The saw is missing the ...

Walker Turner Table Saw  Not rated yet
Funsiona bien e echo gabinetes, puertas, ventanas, marcos de espejos ext. La e usado con (dado y molding head set) nitida.

Walker Turner BIN905 14 Inch Wood-working Band Saw  Not rated yet
My dad has a vintage cast iron 14" band saw by Walker-Turner. It is in perfect working order. The casing could use some freshening up just from age, but ...

BIN905 14 Inch Wood-working Band Saw  Not rated yet
My dad has a vintage cast iron 14" band saw by Walker-Turner. It is in perfect working order. The casing could use some freshening up just from age, but ...

Walker Turner 16" Band Saw  Not rated yet
What a great tool! I purchased it about twelve years ago in a local tool shop. It was badly out of balance and had some make shift blade guides. The original ...

The Driver 24" Scrll Saw SN 184020  Not rated yet
My Father bought this saw in the 30's or early 40's. It is a direct drive with the motor (2 speed) located behind and attached directly to the gearbox....

wood turning lathe  Not rated yet
I have my grandfather's Walker Turner wood turning lathe that had parts at one time for metal turning as well.

The bed is 40". I want to sell it, can ...

add a tool workshop  Not rated yet
This is a lathe which has add-on attachments such as a disk sander/grinder, a belt sander (which is Sears and Roebuck brand),a drilling chuck, and different ...

9" table saw  Not rated yet
The saw has teeth on the adustment bar and a gear on the fence adjustment you can move the fence a hair at a time for minute adjustments
its one piece ...

Walker Turner 16" Wood/Metal Bandsaw  Not rated yet
Purchased as asset from boatmaker I used to work for. Just resawed 6" bending oak into 1" boards, 6" wide with a 6 TPI (or so) Accuright blade. Like ...

Walker Turner Floor Mount Pedestal Drill Press  Not rated yet
S/N 1 944
Found it for $35.00. Rusted but the important parts work great.

Walker Turner Drill press 1-1140 for sale  Not rated yet
I have a Walker Turner Drill Press SN number 1-1140 For sale in omaha Neb Anyone intrested 402-896-3799 This thing works like a dream. One of the best ...

TABLE SAW - 8" - Serial No' 26 - 1 - 48  Not rated yet
I use my table saw regularly and have excellent service from it. The "table insert" however, is in bad shape and I need to replace it - which is more difficult ...

Walker Turner Driver Line Scroll Saw  Not rated yet
This is a Walker Turner Driver Line 24" Scroll Saw.

Walker Turner 20" Floor Model Drill Press, Serial #11-0350  Not rated yet
I have had it for 27 years and use it regularly. However, I am wearing out faster than it is. The table elevating crank and gear assembly is missing and ...

12 Band Saw-BN730?  Not rated yet
I acquired several Driver Lines a couple of years ago and they all are wonderful working condition, however, the band saw kept throwing the blade. I determined ...